Power Up: The Morimoto 4Banger LED Pods have been developed from the ground up to set a new standard in their segment, and the wiring is no exception. If you want the best, bingo. If you want cheap, you’ll want to look for an alternative (and sadly, that won’t be hard to find — because until now, everybody has overlooked the importance of quality cables).
OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Triple-sealed proprietary 4-pin relays with dual-hanger. Proprietary over-molded inline fuse holder with 40A ATO fuse. DT06-2S female outputs with dual seals. Stainless steel power and ground terminals. Proprietary M-Spec push button switch with Yellow-LED backlight.
Proper: All wiring is properly sized, and relays are rated for flicker-free, reliable power delivery for up to six off-road lights. Every line of the beefy 10 AWG copper wiring is protected with black mesh insulation. Every connector has been overmolded, sealed, or protected with heavy-duty heat shrink. Your factory wire harness will fall apart before this thing.
Plug n Play: The connections on the harness are arranged logically to power up to three LED pods on each side of your vehicle. There are six Deutsch outputs in total: a positive battery terminal, a ground terminal, and a switch. The wiring for the in-cabin push-button switch has an inline barrel connector that greatly simplifies installation, since you don’t have to jam the switch mechanism through the firewall.
Compatible: While this harness is a perfect match for the Morimoto 4Banger LED pods on the 2021+ Ford Bronco, you can use it with any other off-road lighting setup that accepts a DT-style two-pin input (which is the industry standard).
| #PART | BAF069H |
|---|
